You have no items in your shopping cart.

Site Under Maintenance. Please do not place any orders for the time being. For urgent matters, kindly contact us at info@fmsaccessories.com.

Menu
Picture of Rifle Mount Lower Support Arm - Replacement Part
Picture of Rifle Mount Lower Support Arm - Replacement Part Picture of Rifle Mount Lower Support Arm - Replacement Part Picture of Rifle Mount Lower Support Arm - Replacement Part Picture of Rifle Mount Lower Support Arm - Replacement Part Picture of Rifle Mount Lower Support Arm - Replacement Part Picture of Rifle Mount Lower Support Arm - Replacement Part

Rifle Mount Lower Support Arm - Replacement Part

$149.00
Replacement lower support arms for use on the FMS Accessories rifle mount. Select the lower support arm variant that matches your need. All support arms come with black powder coated finish and the noted muzzle cup installed. Reuse the mounting hardware from the existing rifle mount. Standard length of 17.5". Note: Special CHP 14" Support Arm not in photo.
SKU: FMSA-GL-ARLL
*

Add To Estimate

Note:  The addition of this or other accessories does not change the overall load limits of your motorcycle - always adhere to the manufacturer's recommendations for loading. 

Free shipping is limited to the continental United States.

Shipping charges apply to international shipments.  

WARNING!       SAFETY FIRST!

Gunlock Safety Precautions

NOTE: FMS Solutions, LLC (FMS) weapon mounts and Santa Cruz Gunlocks, LLC (SCG) are intended for temporary, secure storage of firearms. They are not substitutes for a permanent storage enclosure and only act as limited theft deterrents. And they will not prevent accidental discharge/firing of a chambered round.  To properly and safely use the FMS weapon mounts with Santa Cruz gunlock:

  • Your weapon mount must be fitted / adjusted to match the weapon being mounted.  It is possible that some weapons will not fit the mount correctly, based on variable components / accessories fitted to the weapon. 
  • Read and follow all installation instructions!
  • Do not use if your firearm does not fit the weapon mount or gunlock properly
  • Never leave your firearm unsupervised while using an FMS weapon mount and/or SCG gunlock
  • Never place a loaded firearm in an FMS weapon mount and/or SCG gunlock
  • Never chamber a round while using a FMS weapon mount and/or SCG gunlock
  • It is the responsibility of the user to operate the FMS weapon mount and/or SCG gunlock properly and safely

Customers who bought this item also bought

Picture of Rifle / Shotgun Mounting Bracket

Rifle / Shotgun Mounting Bracket

FMSA-MT-RMB
The rifle mount requires a mounting bracket. Theses brackets are available for right or left side mounting. Though right side is normally the preferred side as it is the dismount side, a left side bracket is also available. Standard RH or LH brackets accommodate barrel lengths up to 14". The RH Long Rifle Mounting bracket accommodates barrel lengths up to 18" (note length includes barrel + suppressor if equipped). Note that using the Long Rifle Mounting bracket raises the rifle stock above the radio box lid height and may partially obstruct the RH side rear pod emergency light, depending upon view angle. Note when using RH long rifle mount w/long barrels, we suggest ordering the heat shield to protect the muzzle cup from excessive exhaust heat. LASO Bracket is a RH bracket, elevated similar to the RH Long, but for SBR rifles where no additional mount is required for the lower support. Use together with lower support / Std. muzzle cup w/heat shield. The Long rifle cable cover kit is recommended when using the RH Long Rifle Mount.
$59.00
Picture of Rifle Heat Shield

Rifle Heat Shield

FMSA-GL-HS
FMS has created a rifle heat shield to deflect the exhaust heat when your rifle mount is adjusted where the muzzle cup is directly in line with the exhaust from the muffler. Examples have been reported where the plastic dip coating on the muzzle cup melts-off. This new heat shield should prevent that. Most typically needed for RH long rifle mounts where the muzzle tip is directly in-line with the exhaust outlet.
$39.00
Picture of Helmet Headset Connection Plug

Helmet Headset Connection Plug

FMSA-EL-HHP
Helmet headset interface plug 8-position socket housing with 8 sockets, for connection or repair of helmet headset interface wiring. Formerly BMW PN 71 60 2 452 845
$9.50
Picture of Microphone Mount

Microphone Mount

FMS Accessories offers the bracket needed to mount the radio microphone or other accessories to the handlebars on the 2015 - 2022 R 1200 / 1250 RT-P models. A new version is also available that is 1.5" taller / forward off-set to work with radio heads that are mounted higher, where the microphone key could otherwise ride against the radio head. As used by AZ DPS. Note: Requires the special bolt kit listed in related products. Formerly BMW PN: 71 60 2 452 875
$29.00

Related products

Picture of Rifle / Shotgun Mounting Bracket

Rifle / Shotgun Mounting Bracket

FMSA-MT-RMB
The rifle mount requires a mounting bracket. Theses brackets are available for right or left side mounting. Though right side is normally the preferred side as it is the dismount side, a left side bracket is also available. Standard RH or LH brackets accommodate barrel lengths up to 14". The RH Long Rifle Mounting bracket accommodates barrel lengths up to 18" (note length includes barrel + suppressor if equipped). Note that using the Long Rifle Mounting bracket raises the rifle stock above the radio box lid height and may partially obstruct the RH side rear pod emergency light, depending upon view angle. Note when using RH long rifle mount w/long barrels, we suggest ordering the heat shield to protect the muzzle cup from excessive exhaust heat. LASO Bracket is a RH bracket, elevated similar to the RH Long, but for SBR rifles where no additional mount is required for the lower support. Use together with lower support / Std. muzzle cup w/heat shield. The Long rifle cable cover kit is recommended when using the RH Long Rifle Mount.
$59.00
Picture of Additional Lock Release Harness - LAPD

Additional Lock Release Harness - LAPD

FMSA-EA
Harness to add a second gun lock release to the weapon system. As used by LAPD, which uses K&L connectors on their rifle racks. This harness requires the addition of the SC-7009-A lock release timer. Formerly BMW PN 71 60 2 452 877 A second version has been created with BMW connectors to accommodate the FMS or BMW rifle mount for use by non-LAPD agencies. Select the desired version in the drop-down box.
$95.00
Picture of Gun Lock Timer - Only for LAPD Release Harness

Gun Lock Timer - Only for LAPD Release Harness

FMSA-EA-GLT
The Santa Cruz adjustable (7-40 seconds) gun lock timer is only used when a secondary release button is added to the motorcycle. The standard gun lock release button on the handlebar already has a 30 second hold feature from the vehicle body controller. Formerly BMW PN 71 60 2 452 895
$61.50
Information
Customer service
Follow us
Powered by nopCommerce
Copyright © 2025 FMS Solutions, LLC. All rights reserved.