Stalker Compact 2015 - 2023+

FMS Accessories offers the bushing and bolt kit needed to mount various accessories to the handlebars on the K52 / 2015 - 2022 R 1200 / 1250 RT-P including radar remote controllers, microphone mounts, cell phone holders, etc. The kit includes a special aluminum bushing, stainless steel washer and pan-head stainless steel Torx head bolt. The kit is available in standard length as well as +5 mm and +10 mm longer bolts for use when multiple brackets are attached to one side. The M10 Torx head bolt already has encapsulated thread locker on the bolt end - the Torx head enables you to apply the required 40 Nm of torque as specified by BMW without deformation. Formerly BMW PN 71 60 2 452 841

FMS Accessories is pleased to offer a Lidar gun holster adapter plate for use on all MY 2015 and later R 1200 / 1250 RT-P models. This plate can be used to adapt earlier 4-bolt Lidar & radar gun holsters from MY 2014 & earlier models to the current K52 generation. The plate is constructed of 12 GA stainless steel, tumble-finished, complete with stainless steel hardware and can be fitted on either the right or left side protection bar. Not required for any FMS Accessories Lidar gun holster! Plate comes with washer-head Torx bolts for top mounting position as well as a counter-sunk Torx bolt when flush installation is required. To use countersunk bolt, you will need to countersink the upper bolt location depending upon which side of the motorcycle you are installing the plate. Original Plate MY2015-2018 Formerly BMW PN 71 60 2 409 956 Tight Fitting Plate MY2019+ Formerly BMW PN 71 60 2 452 407 797

FMS Accessories offers the side stand extension for the 2015+ R 1200 / 1250 RT-P. This extension not only reduces the likelihood of the stand sinking into soft pavement or grass, but provides the added bonus of easier side stand deployment! The side stand extension enables the rider to access the stand from behind the rider footrest, "sweeping" the stand to deployment without taking your eyes off the violator. No more poking your heel between the rider's footrest and the gear shift pedal ... you can saw that peg off! Since the side stand extension is bolted to the top of the stock side stand, it also does not affect the lean angle nor drag on the ground when cornering! One of the many "must have" items!

Updated long single bolt antenna mount for Kustom Ka band / MPH Bee III antennas. Compatible with license plate ID lights.