You have no items in your shopping cart.
Menu
Picture of Vertical Shotgun Mount V2
Picture of Vertical Shotgun Mount V2 Picture of Vertical Shotgun Mount V2 Picture of Vertical Shotgun Mount V2 Picture of Vertical Shotgun Mount V2

Vertical Shotgun Mount V2

$693.00
FMS Accessories vertical shotgun mount developed by BMW and optimized for use on the 2015+ R 1200/1250 RT-P models. The shotgun mount features an adjustable barrel support that will accommodate barrel lengths up to 14". The mount comes complete with a Santa Cruz Gunlocks SC-1 lock, wiring harness terminated for the BMW gun lock release plug, two-positions for elastic strap to prevent small movements, mounting hardware and instructions. The lower support is now indexed to enable the shotgun to be mounted in the traditional position (grip forward) or reversed, by relocating the muzzle plug. Note in the optional orientation, the magazine entry is not covered. Note: A Std. RH mounting bracket must be purchased separately - See Related Products below.
Availability: In stock
SKU: FMSA-GL-SGM
Installation Guide

Add To Estimate

FMS Accessories offer the vertical shotgun mount developed by BMW for use on the 2015+ R 1200/1250 RT-P models.  The shotgun mount features an adjustable barrel support that will accommodate barrel lengths up to 14". The mount comes complete with a Santa Cruz Gunlocks SC-1 lock, wiring harness terminated for the BMW gun lock release plug, mounting hardware and instructions. 

Note:  A std. RH mounting bracket must be purchased separately - See Related Products below.

Note:  The addition of this or other accessories does not change the overall load limits of your motorcycle - always adhere to the manufacturer's recommendations for loading. 

The shotgun mount will mount directly without mounting brackets to the 2006 - 2014 model BMW RT-P.  

Free shipping is limited to the continental United States.

Shipping charges apply to international shipments.  

WARNING!       SAFETY FIRST!

Gunlock Safety Precautions

NOTE: FMS Solutions, LLC (FMS) weapon mounts and Santa Cruz Gunlocks, LLC (SCG) are intended for temporary, secure storage of firearms. They are not substitutes for a permanent storage enclosure and only act as limited theft deterrents. And they will not prevent accidental discharge/firing of a chambered round.  To properly and safely use the FMS weapon mounts with Santa Cruz gunlock:

  • Your weapon mount must be fitted / adjusted to match the weapon being mounted.  It is possible that some weapons will not fit the mount correctly, based on variable components / accessories fitted to the weapon. 
  • Read and follow all installation instructions!
  • Do not use if your firearm does not fit the weapon mount or gunlock properly
  • Never leave your firearm unsupervised while using an FMS weapon mount and/or SCG gunlock
  • Never place a loaded firearm in an FMS weapon mount and/or SCG gunlock
  • Never chamber a round while using a FMS weapon mount and/or SCG gunlock
  • It is the responsibility of the user to operate the FMS weapon mount and/or SCG gunlock properly and safely

Customers who bought this item also bought

Picture of Notepad Holder

Notepad Holder

FMSA-MT-NPH
A notepad holder / bail is a very handy accessory for holding notes, directions or other documents either when parked or while riding. Constructed of formed and tumbled stainless steel, with a stainless steel clip bail riveted to the base. Includes, aluminum spacers, longer stainless steel bolts and 50 sheet notepad. Replacement notepads are available separately in Replacement Parts. Formerly BMW PN 71 60 2 452 888
$48.00
Picture of Handlebar Accessory Mounting Bolt Kit

Handlebar Accessory Mounting Bolt Kit

FMS Accessories offers the bushing and bolt kit needed to mount various accessories to the handlebars on the K52 / 2015 - 2022 R 1200 / 1250 RT-P including radar remote controllers, microphone mounts, cell phone holders, etc. The kit includes a special aluminum bushing, stainless steel washer and pan-head stainless steel Torx head bolt. The kit is available in standard length as well as +5 mm and +10 mm longer bolts for use when multiple brackets are attached to one side. The M10 Torx head bolt already has encapsulated thread locker on the bolt end - the Torx head enables you to apply the required 40 Nm of torque as specified by BMW without deformation. Formerly BMW PN 71 60 2 452 841
$12.00
Picture of Radio Power Connection Plug Code A

Radio Power Connection Plug Code A

FMSA-EL-RPP
BMW 2.5 mm high current plug to connect radios and other devices to the radio power plug on your BMW motor. BMW plug Code A (black housing) supplied with two sockets for 14 - 18 AWG wire connections (w/conductor & insulation crimps). Formerly BMW PN 71 60 2 452 887
$10.00
Picture of Radio Power Plug Divider

Radio Power Plug Divider

FMSA-EL-RPPD
Split the BMW 2.5 mm high current radio power connection (code A) on your BMW motors into two plugs when you need to use this power source to operate more than one item. Harness is made from high quality components with professional terminal crimps and PVC insulation over wires. BMW 2.5 mm Code A socket and pin housings (black) or Code B pin and socket housings (white). Code B is used to split the lighter socket power feed. Overall length: 5.5 inches Wire size: 16 AWG. New version with dual ATM fuse holders for faster installation of radios individually fused receiver and control head. Code A formerly BMW PN 71 60 2 452 880 Connector: BMW 2.5 mm Radio Power Connection Plug Code A. Note: Order two (2) mating Radio Power Connection Plugs with each Radio Power Plug Divider
$36.00

Related products

Picture of Rifle / Shotgun Mounting Bracket

Rifle / Shotgun Mounting Bracket

The rifle mount requires a mounting bracket. Theses brackets are available for right or left side mounting. Though right side is normally the preferred side as it is the dismount side, a left side bracket is also available. Standard RH or LH brackets accommodate barrel lengths up to 14". The NEW Long Rifle Mounting bracket (available in March 2021) accommodates barrel lengths up to 18" (note length includes barrel + suppressor if equipped). Note that using the Long Rifle Mounting bracket raises the rifle stock above the radio box lid height and may partially obstruct the RH side rear pod emergency light, depending upon view angle. Note when using RH long rifle mount w/long barrels, we suggest ordering the heat shield to protect the muzzle cup from excessive exhaust heat. Formerly BMW PN 71 60 2 452 840 RH
$59.00
Picture of Additional Lock Release Harness - LAPD

Additional Lock Release Harness - LAPD

FMSA-EA
Harness to add a second gun lock release to the weapon system. As used by LAPD, which uses K&L connectors on their rifle racks. This harness requires the addition of the SC-7009-A lock release timer. Formerly BMW PN 71 60 2 452 877 A second version has been created with BMW connectors to accommodate the FMS or BMW rifle mount for use by non-LAPD agencies. Select the desired version in the drop-down box.
$79.00
Picture of Gun Lock Timer - Only for LAPD Release Harness

Gun Lock Timer - Only for LAPD Release Harness

FMSA-EA-GLT
The Santa Cruz adjustable (7-40 seconds) gun lock timer is only used when a secondary release button is added to the motorcycle. The standard gun lock release button on the handlebar already has a 30 second hold feature from the vehicle body controller. Formerly BMW PN 71 60 2 452 895
$61.50
Information
Customer service
Follow us
Powered by nopCommerce
Copyright © 2023 FMS Solutions, LLC. All rights reserved.